|
|
Temporary Earthing System
Temporary grounding devices are hand-held equlpment that brought and connected to the connecting points of electrical instigations for earthing and it permits conductors to be earthed as well as short circuit.
PETUNIA is manufacturer of an acceptable range of temporary earthing devices for 20KV up to 400KV, and maximum 40KA, 0.5sec. Short circuit current. Temporary devices as well as the matching connection points on the conductor and on the conductor and on the earthing system, must be designed to withstand the rated short-circuit current of the respective electrical installation.
Cables
Our earth cables, in conformity with standard IEC 61138, are of bare annealed stranded copper wires and highly flexible. They are mechanically protected by a transparent plastic sheath. Cables are factory lugged under press. Their waterproof quality is strengths by a heat-shrunk transparent or black sleeve.
| FCCS 50 |
50 |
5005 |
5006 |
5007 |
5008 |
5009 |
5010 |
| FCCS 70 |
70 |
7005 |
7006 |
7007 |
7008 |
7009 |
7010 |
| FCCS 95 |
95 |
9505 |
9506 |
9507 |
9508 |
9509 |
9510 |
| FCCS 120 |
120 |
12005 |
12006 |
12007 |
12008 |
12009 |
12010 |
| FCCS 150 |
150 |
15005 |
15006 |
15007 |
15008 |
15009 |
15010 |
Conductor Clamp & Fitting
These clamps are made of aluminum alloy and with double thread system for quick operation. Using of spring system in these clamps, help to absorb the electro-dynamic shock in case of fault current. Clamps are tested according IEC 61230.
Fitting
Earth Clamps
Petunia earth clamps have high strength copper alloy bodies , corrosion resistance, high conductivity and mechanical strength, to support and passing electrical current.
Earth Terminal Double Position
Made of Brass for provideingearthing points in electrical installations in order to use standard conductor clamps. They are installed on the frame work of substations and high voltage installations.
Heavy Duty Insulation Stick
PRe Heavy duty insulating stick used for heavy duty operations like Earthing of high and very high voltage lines and substations. They are made of composite fiberglass tube with 100 KV/30 Cm dielectric strength in humid atmosphere.
| PRE1 100 |
1,0 |
1 |
1,1 |
| PRE1 150 |
1,5 |
1 |
1,5 |
| PRE1 200 |
2,0 |
1 |
1,9 |
| PRE1 250 |
2,5 |
1 |
2,3 |
| PRE1 300 |
3,0 |
1 |
2,6 |
| PRE1 400 |
4,0 |
1 |
3,4 |
| PRE2 200 |
2,0 |
2 |
2,3 |
| PRE2 250 |
2,5 |
2 |
2,5 |
| PRE2 300 |
3,0 |
2 |
3,0 |
| PRE2 400 |
4,0 |
2 |
3,8 |
| PRE3 300 |
3,0 |
3 |
3,4 |
| PRE3 450 |
4,5 |
3 |
4,5 |
| PRE3 600 |
6,0 |
3 |
5,7 |
| PRE . … |
.... |
. |
… |
| PSE 100 |
1,0 |
1 |
1,2 |
| PSE 150 |
1,5 |
1 |
1,5 |
| PSE 200 |
2,0 |
1 |
1,9 |
| PSE 250 |
2,5 |
1 |
2,3 |
| PSE 100 |
1,0 |
1 |
1,1 |
| PSE 150 |
1,5 |
1 |
1,5 |
| PSE 200 |
2,0 |
1,9 |
|
| PSE 250 |
2,5 |
1 |
2,3 |
Boxes
PBox cases are used for one set of cable, earth clamp and line earthing clamp. In each SBox case, there are three sets of earth cables, earth clamps and line earthing clamps.
|